technical data sheet 6 lake street, lawrence, ma 01841 gort road business park, ennis, co. clare, ireland 1-800-446-1158 / (978) 620-2600 / fax: (978) 689-0803 tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: http://www.microsemi.com p-channel mosfet qualified per mil-prf-19500/595 t4-lds-0061 rev. 2 (101873) page 1 of 4 devices levels 2n7236 2n7236u jan jantx jantxv absolute maximum ratings (t c = +25c unless otherwise noted) parameters / test conditions symbol value unit drain ? source voltage v ds -100 vdc gate ? source voltage v gs 20 vdc continuous drain current t c = +25c i d1 -18 adc continuous drain current t c = +100c i d2 -11 adc max. power dissipation t c = +25c p tl 125 (1) w drain to source on state resistance r ds(on) 0.20 (2) operating & storage temperature t op , t stg -55 to +150 c note: (1) derated linearly by 1.0 w/c for t c > +25c (2) v gs = 10vdc, i d = -11a electrical characteristics (t a = +25c, unless otherwise noted) parameters / test conditions symbol min. max. unit off charactertics drain-source breakdown voltage v gs = 0v, i d = 1madc v (br)dss -100 vdc gate-source voltage (threshold) v ds v gs , i d = -0.25ma v ds v gs , i d = -0.25ma, t j = +125c v ds v gs , i d = -0.25ma, t j = -55c v gs(th)1 v gs(th)2 v gs ( th ) 3 -2.0 -1.0 -4.0 -5.0 vdc gate current v gs = 20v, v ds = 0v v gs = 20v, v ds = 0v, t j = +125c i gss1 i gss2 100 200 nadc drain current v gs = 0v, v ds = -80v v gs = 0v, v ds = -100v, t j = +125c v gs = 0v, v ds = -80v, t j = +125c i dss1 i dss2 i dss3 -25 -1.0 -0.25 adc madc madc static drain-source on -state resistance v gs = 10v, i d = -11a pulsed v gs = -10v, i d = -18a pulsed t j = +125c v gs = -10v, i d = -11a pulsed r ds(on)1 r ds(on)2 r ds(on)3 0.20 0.22 0.34 diode forward voltage v gs = 0v, i d = -18a pulsed v sd -5.0 vdc to-254aa u-pkg (smd-1) (to-267ab)
technical data sheet 6 lake street, lawrence, ma 01841 gort road business park, ennis, co. clare, ireland 1-800-446-1158 / (978) 620-2600 / fax: (978) 689-0803 tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: http://www.microsemi.com t4-lds-0061 rev. 2 (101873) page 2 of 4 dynamic characteristics parameters / test conditions symbol min. max. unit gate charge: q g(on) q gs q gd 60 13 35.2 nc on-state gate charge gate to source charge gate to drain charge v gs = -10v, i d = -18a v ds = -50v switching characteristics parameters / test conditions symbol min. max. unit switching time tests: turn-on delay time rinse time turn-off delay time fall time i d = -11a, v gs = -10vdc, gate drive impedance = 9.1 , v dd = -50vdc t d(on) t r t d(off) t f 35 85 85 65 ns diode reverse recovery time di/dt 100a/s, v dd 30v, i d = -18a t rr 280 ns
technical data sheet 6 lake street, lawrence, ma 01841 gort road business park, ennis, co. clare, ireland 1-800-446-1158 / (978) 620-2600 / fax: (978) 689-0803 tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: http://www.microsemi.com t4-lds-0061 rev. 2 (101873) page 3 of 4 package dimensions notes: 1. dimensions are in inches. 2. millimeters are given for general information only. 3. protrusion thickness of ceramic eyelets included in dimension ll. 4. all terminals are isolated from case. 5. in accordance with asme y14. 5m, diameters are equivalent to x symbology. figure 1. physical dimensions for to-254aa (2n7236) . ltr dimensions notes inches millimeters min max min max bl .535 .545 13.59 13.84 ch .249 .260 6.32 6.60 ld .035 .045 0.89 1.14 ll .510 .570 12.95 14.48 3 lo .150 bsc 3.81 bsc ls .150 bsc 3.81 bsc mhd .139 .149 3.53 3.78 mho .665 .685 16.89 17.40 tl .790 .800 20.07 20.32 4 tt .040 .050 1.02 1.27 4 tw .535 .545 13.59 13.84 term 1 drain term 2 source term 3 gate
technical data sheet 6 lake street, lawrence, ma 01841 gort road business park, ennis, co. clare, ireland 1-800-446-1158 / (978) 620-2600 / fax: (978) 689-0803 tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: http://www.microsemi.com t4-lds-0061 rev. 2 (101873) page 4 of 4 letter dimensions inches millimeters min max min max bl .620 .630 15.75 16.00 bw .445 .455 11.30 11.56 ch .142 3.60 lh .010 .020 0.26 0.50 ll 1 .410 .420 10.41 10.67 ll 2 .152 .162 3.86 4.11 ls 1 .210 bsc 5.33 bsc ls 2 .105 bsc 2.67 bsc lw 1 .370 .380 9.40 9.65 lw 2 .135 .145 3.43 3.68 q 1 .030 0.76 q 2 .035 0.89 term 1 drain term 2 gate term 3 source notes: 1. dimensions are in inches. 2. millimeters are given for information only. 3. the lid shall be electrically isolat ed from the drain, gate and source. 4. in accordance with asme y14. 5m, diameters are equivalent to x symbology. figure 2. dimensions and configuration of surf ace mount package outlin e (to-267ab), 2n7236u .
|
